nothnxtoyou Posted May 25, 2010 Share Posted May 25, 2010 When you get to the puzzle, you'll know. You will need to connect the Drive box (lower center) to different outputs using the puzzle, each task must be done within 50 lever pulls. I recommend you reset once achieve each goal 1-4.All directions are referenced in the change view mode1) get the double stacked gear on the right by lowering the platform.2) get the triple stacked gear on the left by lowering the platform. These are Upper outputs on the respective counters. 3) get the right counter to read 504) get the left stuck on 62-53 These are the lower outputs on each counter. Once completed with goal 4 resets are no longer required or recommended. 5) bring the center downThis is the input on the upper center and requires the triple stacked gears.DO NOT RESET after this. 6) all four of the outputs on the center must be powered. DO NOT RESET after this. 7) Raise the center, just like step 5DO NOT RESET after this. To make multiple bars you can move one gear out of the chain then back in to lower the platform. repeat 6 and 7. Link to comment Share on other sites More sharing options...
bigie Posted May 26, 2010 Share Posted May 26, 2010 to open door upstairs u need prime bar from EW2 use on slot.. then enter, pull lever then push red button, pull lever again to exit and grab body bar out of slot. need 2 bars for quest 4 if u want full body set. (helm, shield, body) need battered or slashed book in order for it to allow you to make the body to finish the quest. and (Body body) examine: A body made in the Elemental Workshop. and it does like a swirl of blue emotion when you put it on (Body shield ) examine: A shield made in the Elemental Workshop. Don't be in FearBigie is here Link to comment Share on other sites More sharing options...
Rien Posted June 5, 2010 Share Posted June 5, 2010 I greatly appreciate your willingness to help; thank you. :) Unfortunately, this information is already included in our EWIII Quest Guide. If you see anything there that might need to be changed, please post back in this subforums, and I'll be happy to work on it. Thanks for the thought, as I really do appreciate it, even if I'm unable to use your submission. :) Interested in helping the Tip.It Crew? Check out our Website Updates & Corrections Board! Link to comment Share on other sites More sharing options...
Recommended Posts