Making a pure miner/smither

[RSBDavid]

I have always had a love for smithing but never was encouraged to use that to my advantage. now , i am going to make a pure miner/smither.

 

 

 

1.Where should I train as f2p...p2p?

 

 

 

2. How should i train smithing?

 

 

 

 

 

(I know MasterSmither is going to post here :D )

[Master_Smither]

Omg how did you know!!!!!!!!

 

 

 

Well:

 

 

 

1. Train mining at the Varrock west mines by banking every ore. Which meens the copper+tin to 15 and the iron to lvl 70. Make sure u have even copper+tin amounts for smithing. 70-90 Mining mine mith ores+coal just enough to make mith bars of course. Then at 90-99 mine addy+coal. Then get the smithing lvls needed by mining anything

 

Use the mining guild for mith+coal and the Fally mines for addy ores and use the door from fally mines-mining guild for coal. So basically after 70 mining stick inside fally for ever!

 

 

 

2. Just make steel bars from the iron ore from 15-70 and the coal from 70-Whenever. Then sell the bars for profit or you can make whatever u want with the bars. Then make the mith and addy bars and sell/make stuff with them.Smith in Al Khaird it's the best.*

 

 

 

*If you where a memeber I'd suggest making Bolts from the mith+addy bars.

[jimi2424]

Updizate: New edgeville furnace closer than al kharid??? :-w

[Master_Smither]

Updizate: New edgeville furnace closer than al kharid??? :-w

 

 

 

Memebers only?

 

 

 

But Al Khaird is a funner place anyway more people to chat while smithing with.

[wioneo]

Updizate: New edgeville furnace closer than al kharid??? :-w

 

 

 

Memebers only?

 

 

 

But Al Khaird is a funner place anyway more people to chat while smithing with.

 

 

 

If you have a decent hunter level you can catch the implings that spawn in the bank. They respawn pretty fast. Two? Three minutes maybe?

[Master_Smither]

Updizate: New edgeville furnace closer than al kharid??? :-w

 

 

 

Memebers only?

 

 

 

But Al Khaird is a funner place anyway more people to chat while smithing with.

 

 

 

If you have a decent hunter level you can catch the implings that spawn in the bank. They respawn pretty fast. Two? Three minutes maybe?

 

 

 

Ya i saw a ninja there once

 

 

 

Also Edgeville furnace need completion of the varrock dairys

[goldhawk]

You dont ever need to be members to get 99smithing and mining, you can get them at practiacly the same speed as a f2p.

 

 

 

Mining: the best way to get 99 mining would be to powermine iron ALL the way, allthough sum people say that granite is faster at lvl 70+ My tests show that granite is only a bit faster, such a small ammount that it wouldnt even make much of a difference over the 13m xp to 99.

 

If you are getting smithing too you might want to bank the ores you need for smithing, but only after you get 30mining.

 

The best place to powermine iron is in rimmington (for f2ps).

 

 

 

Smithing: To start off do dorics anvill quest(u can do it at lvl 3, i did on my smith pure, you just need good food) this gets you 29 smith. Now mine enough iron ore to get 50 smthing, as I said w8 till you get 30 mining though. Once you have 50 you can use the following method if you are willing to get 43 mage as well.

 

You get to start superheating Mith bars, YOU WILL NEED 1.5m THOUGH, and you will get 100% return on the $$ so dont worry about losing $$.

 

Buy the coal at 180-190ea the mith ore at 400-450ea and the nats at 280-290ea, buying at the higher prices makes u break even, the lower prices you make proffit. after you ahve superheated the bars you will sell them 1.5kea on the forums, it may take a while to find a buyer but be patient, it helps to have a frind buy them and make a thread to sell them.

 

With this method i got 67 smith on my main in 10days and spent no $$ on it ^.^ .

 

 

 

Phew, I'm tired of writing for now, i'll put the non-superheating method here later.

 

 

 

*edit* The Edgeville furnace is still worse than the port phasmatis one because of the door you have to open, unless you are making iron bars with rings of forging or goldsmithing with guauntlets.If you are making steel mith addy ore rune it's quite a bit slower than phasmatis.

 

 

 

Add me, Pseudo death ,ingame I want to see how you progress on your smithing/mining pure goes.

 

Untill later, good luck :

[Doomster]

The dangerous smithing quest (at low level) is Knight's Sword.

 

 

 

One way to get the Blurite is to equip only a pick, carry nothing but a littele medium food which you MUST use up, then mine the blurite and then ensure that you have no food left when you die.

 

 

 

Blurite is at the very last of your 3 saved items, so it has to be one of the ONLY 3 items you are carrying.

 

 

 

 

 

Doric's Anvil should be done early, using bought or picked up Iron.

 

 

 

Actually, if you mine and smith, load up on dropped ores if the mining is bad, as smithing is always going to trail mining.

 

 

 

One priciple which always helps - "If life gives you lemons, make lemonade". If your training spot is too busy to be useful, have a plan B.

 

 

 

Plan B may be to save up some smithing to do when the mining is bad.

[goldhawk]

Smithing doesnt have to trail mining, if you superheat it's acutlay quite easy to keep smithing even with mining, at least untill a pretty high lvl like 70.

 

 

 

The reason you powermine ores to get to at least 30 mining be4 you start banking is that the ammount of ores to get you to 30 mining is so small the if you drop them it all not have much effect on how far behind smithing is. EG. if it takes 200 copper/tin ore and 500 iron ore to get lvl 30, those same ores could probably get you 28, if you do dorics anvil you will only be 1 behind in smithing.

 

 

 

Ps. I got from 1-40mining and did dorics anvill in 5 hours, its a snap :

[cat666]

Why would you want a pure miner/smither? Just get em as high as you can on ya main surely?

[RSBDavid]

Thx for the replies, I am going to do what Master Smither said.

 

 

 

After i get 60 of ea ill become a member and make bolts.

 

 

 

Edit: the name is "smith da bar"