Skip to content
View in the app

A better way to browse. Learn more.

Tip.It Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

So I have to do this project...

Featured Replies

Well hello there tip.it, Sirgatory here with a little assistance needed.

 

 

 

Okay, so I take a problem solving class at my HS, and this week our project is to make a balloon racer.

 

 

 

The Materials (all must be used, no more no less)

 

 

 

1 Index Card

 

1 Balloon

 

3 Paper Clips

 

2 1/2 inch straw

 

18 inches of tape ( not all must be used)

 

 

 

 

 

So we have to use all of that, to transport 2 oz of weight across a 18 foot stretch of fish line.

 

 

 

Unfortunately, not one person out of our 26 person class has come up with a way to get the transport even half way across. Also unfortunate, is that we must have to get graded on how far the transport goes by tomorrow. if it goes no where, you get a 0, if it goes half way, you get a 50. You get the idea.

 

 

 

So after searching the internet tonight, I still haven't found a way to make it work. Now i'm here to ask all of you out there with creative minds to help me out and give me ideas. :)

 

 

 

Also, if this is in the wrong forum, mods please move it, do not lock it on me :(

My old signature had to do with PKing the classic way.

Unfortunately, that is no more.

hmm.... so is it just a straight 18 foot stretch?

 

 

 

You obviously need a way to make it move some. I would think that you would need to pop a hold near the end of the ballon with it taped to a straw on the fishing wire... That's the only idea I have.

 

 

 

Weird project...

I'm assuming the weight should go on the index card?

 

 

 

only thing I can come up with is taping a straw to the balloon's opening and let it go when its inflated , but it would be hard to get it straight and make it go 18 feet...

1z2zrwo.jpg

*Waits for Kashi, since he is a genius."

srequest2me.jpg

I am an Atheist, and I take pride in it.

you'll have to forgive the cudeness of this, but shazam.

 

i have no baloons atm, but i'm sure you can work out where it goes :P

 

 

 

picture020ya8.jpg

 

 

 

punctured the card at both ends so the paperclip can "loop" through it

 

I then used the 3rd one to brace the others (stop them moving together / apart while traveling)

 

 

 

the straw sits in the bottom loop of the card just for more stability.

 

 

 

picture021of3.jpg

 

 

 

didn't really have time, but use tape to fold up the edges a bit towards the paper clips. so it's a weak curve (just so the weight can't slide off the edges and such).

 

 

 

and that's it.

 

 

 

the tops of the paperclips sit on the string, and you're done.

 

 

 

That should work :ohnoes:

First tell me where's the weight supposed to go? Or is that your choice depending on your personal design? :-k

  • Author

It's completely your choice on how you want to do everything :)

 

 

 

And thank you darkrick, I have not tried that yet, though something similar. Maybe your version will work :-k :)

My old signature had to do with PKing the classic way.

Unfortunately, that is no more.

It's completely your choice on how you want to do everything :)

 

 

 

And thank you darkrick, I have not tried that yet, though something similar. Maybe your version will work :-k :)

 

Let's hope it, looking forward to your result! :)

20a7yhg.jpg

At least, I think that.

Make a paper airplane out of the index card, tape straw to it, tape balloon to straw. Shazam!

 

 

 

We had to do this stuff to once. :P

The popularity of any given religion today depends on the victories of the wars they fought in the past.

- Me!

  • Author

Well, my school day is over, and I took my shot at the project.

 

 

 

What I ended up doing was taping the index card, straw and 2 paper clips to the top of the balloon. I then Hooked the 2 clips to the line.

 

 

 

Then, I wrapped the other paper clip around the 2 oz weight for no reason, and taped the weight to the bottom of the balloon, and sent it sailing. I got it all the way to the end, and then some :D

 

 

 

Thanks for your help, Dark Ricks Idea was what inspired my model :)

My old signature had to do with PKing the classic way.

Unfortunately, that is no more.

Ok, fill the balloon with helium, attach the straw to the balloon with tape, then use the tape to support each of the four corners of the index card (! piece from each corner, the other end of the tape ending securely on the straw)

 

 

 

This is the best solution I can come up with. And to be fair to me, you said 18 feet, but you never specified the direction that it had to go in.

There's no sig here. Move it along...

Ok, fill the balloon with helium, attach the straw to the balloon with tape, then use the tape to support each of the four corners of the index card (! piece from each corner, the other end of the tape ending securely on the straw)

 

 

 

This is the best solution I can come up with. And to be fair to me, you said 18 feet, but you never specified the direction that it had to go in.

 

 

 

A. He has already solved the problem...

 

B. Where's he going to get helium?

 

C. He said ACROSS an 18 foot stretch of fish line.

Create an account or sign in to comment

Important Information

By using this site, you agree to our Terms of Use.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.